51 35 Power windows, rear
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR POWER WINDOWS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Door window glass to power window regulator | F06/F07 | Multipoint screw | 12 Nm | |
| With special tool 51 3 240 and torque wrench (long lever arm) | 9 Nm | ||||
| 2AZ | Side window, stationary to inner door panel | F06/F07 | M6 | 7.5 Nm | |
| 3AZ | Side window, stationary to door bottom | F06/F07 | M6 | 7.5 Nm | |
| 4AZ | Preloading adjustment | F06/F07 | M8 | 16 Nm | |
| 5AZ | Roller sunblind drive to inner door panel | F07 | 3 Nm | ||
| 6AZ | Adjustment cavity gap | F06/F07 | M6 | 9.5 Nm | |
| 7AZ | Window regulator to inner door panel | F06/F07 | M6 | 9.5 Nm | |
| 8AZ | Flat motor to inner door panel/mounting plate | F06/F07 | 3 Nm | ||
| 9AZ | Flat motor holder to inner door panel | F07 | 3 Nm | ||
| 10AZ | Mounting plate on inner door panel | F06 | 8 Nm | ||