34 21 Rear Brake
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR BRAKE
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Brake disc to wheel hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Replace screw | 16 Nm |
| 2AZ | Brake anchor plate to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12x1.5 | 110 Nm | |
| F03 | M14x1.5 | Replace screws.
IMPORTANT:
Observe 4 phase tightening!
|
|||
| Jointing torque | 150 Nm | ||||
| Release min. | 90 ° | ||||
| Jointing torque | 150 Nm | ||||
| Angle of rotation | 180°± 15° | ||||
| F25/F26 | M12x1.5 | Replace screws. | |||
| Jointing torque | 75 Nm | ||||
| Angle of rotation | 45°10° | ||||
| 3AZ | Protective plate to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6 | Replace screws | 12 Nm |
| 4AZ | Guide screw (brake caliper to brake anchor plate) | F01, F02, F03, F04, F07 | WAF 7 | 30-5 Nm | |
| 5AZ | Guide screw (brake caliper to brake anchor plate) | F06/F10/F12/F11/F13/F18/F25/F26 | WAF 13 | Replace screws | 35 Nm |