34 32 Brake Lines
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - BRAKE LINES
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Brake line screws/retaining screws | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 x 1 | 14 Nm | |
| F01/F02/F03/F04/F06/F07/F10/F11/F13/F12/F18/F25/F26 | M12 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | ||
| F01/F02/F03/F04/F06/F07/F11/F10/F12/F13/F18/F25/F26 | M12 x 1 | Blue union screw connection in aluminium e.g. hydraulic control unit | 17 Nm | ||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M10 x 1 | 14 Nm | |||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | ||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 x 1 | Blue union screw connection in aluminium e.g. hydraulic control unit | 17 Nm | ||
| 2AZ | Brake hose to brake caliper, front | F01/F02/F03/F04/F03/F06/F07/F10/F11/F12/F13/F18/F25/F26 | Cap screw | 17 Nm | |
| 3AZ | Brake hose to brake caliper, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | 24 Nm | ||
| F10/F12/F13/M5/M6 | M10x1 | Banjo bolt (renew seals) | 40 Nm | ||