LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Rear Axle - Repair) >> General >> 33... Grease for flange nut and drive flange

33... Grease for flange nut and drive flange

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

The following grease should be used for greasing the contact surfaces of the flange nut to the bearing inner ring and to the insert nut, and for greasing the face of the drive flange:

- Castrol Optitemp HAT LF1, BMW part number 83 23 0 417 754 (50 g tube)

- Drei Bond adhesive Type 1385, BMW part number 83 19 0 417 376 (50 g tube)