33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft on drive flange hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M27 | Replace collar nut. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 45 ° | ||||
| F06 M6/F10 M5/F12 M6/F13 M6 | M16 | Observe the repair instructions. Replace collar bolt and spring. |
|||
| Jointing torque | 50 Nm | ||||
| Angle of rotation | 155 ° | ||||
| F03 | M27 | Replace collar nut. | 420 Nm | ||
| 2AZ | Wheel bearing to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws. | 100 Nm |