33 55 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bracket, anti-roll bar to rear axle support | F01/F02/F03/F04/F07/F06/F10/F11/F12/F13/F18 | M10 | Replace screws. | 56 Nm |
| F25/F26 | M8 | Replace screw. | 34 Nm | ||
| 2AZ | Anti-roll bar link to anti-roll bar/swinging arm | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 | Replace nuts. | 56 Nm |
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |||
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Vibration absorber to anti-roll bar bracket | F01/F02/F06/F07/F10/F11/F12 | Replace screw. | 19 Nm | |
| 4AZ | Anti-roll bar link to wheel carrier | F25/F26 | M10 | Replace screw. | 56 Nm |