31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M8 | 19 Nm | |
| 2AZ | Output shaft to wheel hub | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M16 | Observe instructions in repair procedures. Replace collar bolt and spring. |
|
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||