31 10 Front Axle Suspension
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front axle support to engine support (screw connection, front, middle, rear) | F01/F02/F03/F04/F06 (without M6)/F07/F10 (without M5)/F11/F12 (without M6)/F13 (without M6)/F18 | M12 | Observe repair instructions. | 100 Nm |
| F25/F26 | M12 | Replace screws. | |||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F06 M6/F10 M5/F12 M6/F13 M6 | M10 | Replace screws. | |||
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Thrust zone to front axle support | F01/F02/F04/F06 (without M6)/F07/F10 (without M5)/F11/F12 (without M6)/F13 (without M6) | M8 | Replace screws. | |
| Jointing torque | 15 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F06 M6/F10 M5/F12 M6/F13 M6 | M10 | Replace screws. | |||
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F25/F26 | M12 | 110 Nm | |||
| 3AZ | Acoustic strut to front axle support | F01/F02 | M8 | ||
| Jointing torque | 15 Nm | ||||
| Angle of rotation | 90 ° | ||||