24 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission to engine | ||||
| Torx bolts | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | M6 | 9 Nm | ||
| Torx bolts | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | M10 | 38 Nm | ||
| GA8HP45Z/GA8P75H | M10x10.9 | 56 Nm | |||
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M8 | 19 Nm | ||
| GA8HP70Z (N63) | M8 | 21 Nm | |||
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M12 | 66 Nm | ||
| 2AZ | Transmission to engine | N52/N53/N54/N55 Aluminum screws/bolts are not magnetic GA6HP19Z/GA6HP26Z/GA8HP45Z |
Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z | M10x30 | Jointing torque | 20 Nm | ||
| Angle of rotation | 90-110 ° | ||||
| GA6HP19Z | M10x85 | Jointing torque | 20 Nm | ||
| Angle of rotation | 180-200 ° | ||||
| GA6HP19Z/GA8HP45Z | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° | ||||
| 3AZ | Cover plate for transmission | GA6HP19Z/GA8HP45Z | M6 | 9 Nm | |