11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | VANOS gear to inlet and outlet camshafts (contact surface on screw head must be greased with assembly paste 4.4 . See OVERVIEW OF CONSUMABLES (BMW ELECTRONIC PARTS CATALOGUE) ) | N63O1 | M10x1 | Replace screw. | |
| Jointing torque | 30 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | N63O1 | M14 x 1.5 | 20 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | N63O1 | M6 | 10 Nm | |