11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | VANOS gear to inlet and exhaust camshafts | N63 | M10x1 | Replace screw | |
| Jointing torque | 30 Nm | ||||
| Torque angle | 90 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | N63 | M14 x 1.5 | 13 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | N63 | M6 | 10 Nm | |