11 53 Thermostat and Connections
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - THERMOSTAT AND CONNECTIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Thermostat housing to coolant pump. | N55 | M6 x 25 | 8 Nm | |
| 2AZ | Thermostat housing to holder. | N55 | 9 Nm | ||
| 3AZ | Holder to radiator | N55 | Self-tapping screw | 3 Nm | |
| 4AZ | Feed line to crankcase. | N55 | M6x16 | 8.5 Nm | |
| 5AZ | Feed line to coolant pump. | N55 | L42-48 | Hose clamp | 3 Nm |
| 6AZ | Oil-to-water heat exchanger (OWWT) feed line. | N55 | L18-24 | Hose clamp | 3 Nm |
| 7AZ | Coolant line to cylinder head (short-circuit line). | N55 | M6 x 23 | 8.5 Nm | |
| 8AZ | Coolant line to thermostat. | N55 | Hose clamp with corrugated spring | 3 Nm | |
| 9AZ | Coolant hose from thermostat to coolant pump | N55 | L42-48 | 3 Nm | |
| 10AZ | Radiator supply and drain line to exhaust turbocharger | N55 | M6 x 16 | 8 Nm | |
| 11AZ | Coolant return line to crankcase. | N55 | M6 x 16 | 8 Nm | |