11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Jump guard to crankcase cover | N63 O1 | M6x25 | 10 Nm | |
| 2AZ | Gear case cover to crankcase, bottom | N63 O1 | M8x45 M8x55 M8x65 M8x85 |
24 Nm | |
| 3AZ | Gear case cover to top of cylinder head, left and right | N63 O1 | M6x20 | 10 Nm | |
| 4AZ | End cover (oil) to crankcase (transmission side) | N63 O1 | M6x30 | Observe tightening sequence. | 10 Nm |
| 5AZ | End cover (water) to crankcase (transmission side) | N63 O1 | M6x18 | Observe tightening sequence. | 11 Nm |