11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Jump guard to crankcase | N63 | M6 | 10 Nm | |
| 2AZ | Gear case cover to crankcase, bottom | N63 | M8 | 21 Nm | |
| 3AZ | Gear case cover to cylinder head, top | N63 | M6 | 10 Nm | |
| 4AZ | End cover (oil) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 5AZ | End cover (water) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |