11 11 Engine Block, Cylinder Crankcase
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATION
| Bore Ø stage 0 (1) | mm | 84.000+0.02 | ||
| Bore Ø stage 00 a) | mm | |||
| Bore Ø stage 1 a) | mm | 84.250+0.02 | ||
| Permitted out-of-round of cylinder bore a) | mm | 0.01 | ||
| Permitted conicity of cylinder bore a) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||