11 12 Cylinder head with lid
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD AND CYLINDER HEAD COVER SPECIFICATION
| Cylinder head height: Original dimension | mm | 112.00 ± 0.05 |
| Machining limit | mm | 111.70 ± 0.05 |
| Valve guides are not available as replacement parts. | ||
| Inner diameter of installed valve guide | ||
| Original intake valve | mm | 5.00... 5.02 |
| Original exhaust valve | mm | 6.00... 6.02 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | cannot be measured |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 22.00... 22.05 |