LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 658 (Body Equipment - Special Tools) >> Body Equipment >> 51-4100 Tool >> 0496530 514100 Tool Mechanical tool >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

01 18 08 (482)

Fig 1: Identifying Tool Mechanical Tool (514100)
G06876351Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

  1. 13 = 0496783 Die-plate

    Note:

  2. 12 = 0496636 Nut
    NOTE: As alternative for 51 4 106 with restricted installation space Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  3. 14 = 0496784 Tool
    NOTE: Cutting punch for front door seat memory switch
  4. 11 = 0496550 Hexagon socket
    NOTE: (Hexagon socket wrench) 6 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  5. 10 = 0496549 Outpusher
    NOTE: (Ejector) For removing residual punched portions from cutting matrix. Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  6. 9 = 0496548 Tool
    NOTE: (Arc punch) size 12 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  7. 8 = 0496547 Template
    NOTE: For rear door trim F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  8. 7 = 0496546 Template
    NOTE: For rear door trim F01 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  9. 6 = 0496545 Nut
    NOTE: (Wing nut) M12 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  10. 5 = 0496544 Washer
    NOTE: (Thrust washer) Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  11. 4 = 0496543 Tool
    NOTE: (Cutting punch) top for F01/F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  12. 3 = 0496542 Die-plate
    NOTE: (Cutting matrix) bottom for F01/F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  13. 2 = 0496541 Tool
    NOTE: (Top yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
  14. 1 = 0496540 Tool
    NOTE: (Bottom yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
scientia non olet · About LEMON Manuals