LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Rear Axle - Special Tools) >> Rear Axle >> 33-5120 Device >> 0495851 335120 Device Minimum set: Mechanical tools Mechanical tool >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

01 01 07 (333)

Consisting of:

Fig 1: Identifying Device (33-5120)
G04795709Courtesy of BMW OF NORTH AMERICA, INC.
  1. 6 = 0496765 Shaped part
    NOTE: For pressing output shaft out of rear axle final drive.

    In conjunction with: 33 5 120

  2. 7 = 0496795 Shaped part
    NOTE: For driving output shaft into rear axle final drive.
  3. 5 = 0495857 Shaped element
    NOTE: Sale of existing inventory, then available as part of set of tools 33 5 120 -> (83 30 0 495 851) only.
  4. 4 = 0495856 Shaped element
    NOTE: (Shaped element) shaped element (bearing shell) available as part of set of tools 33 5 120 -> (83 30 0 495 851) only.
  5. 3 = 0495855 Rod
    NOTE: Only available via complete tool set 33 5 120 - > (83 30 0 495 851).
  6. 2 = 0495854 Screw
    NOTE: (Knurled screw with thrust piece) Only available as part of complete tool set 33 5 120 -> (83 30 0 495 851) only.
  7. 1 = 0495853 Basic body
    NOTE: Only available via complete tool set 33 5 120 - > (83 30 0 495 851).