LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Rear Axle - Special Tools) >> Rear Axle >> 33-3330 Device >> 0492322 333330 Device Minimum set: Mechanical tools Mechanical tool >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

01 10 90 (288)

Consisting of:

  1. 4 = 0492326 Holding sleeve
    NOTE: (Spacer sleeve) For installing the ball joint, series: E31, E36, E38, E39, E46, E65, E66, E85
    Fig 1: Identifying Device (33-3330)
    G04745593Courtesy of BMW OF NORTH AMERICA, INC.
  2. 3 = 0492325 Spindle
    NOTE: (Spindle with thrust nut) Replaced by 33 3 010/0 496 552
  3. 2 = 0492324 Holding sleeve
    NOTE: (Extraction sleeve) Series: E36, E46
  4. 1 = 0492323 Holding sleeve
    NOTE: (Spacer sleeve) For pulling out/series: E36, E46
scientia non olet · About LEMON Manuals