LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Engine - Special Tools) >> Engine >> 11-9510 Device >> 0495471 119510 Device Mechanical tool

0495471 119510 Device Mechanical tool

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For mounting the radial shaft seal of the crankshaft, front.

Consisting of:

  1. 5 = 0495476 Nut
    NOTE: (Nut with bearing) Can no longer be ordered separately. Only available as part of set 31 2 120 = 83 30 0 491 909.
  2. 4 = 0495475 Holding sleeve
    NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.
  3. 3 = 0495474 Holding sleeve
    NOTE: (Sliding sleeve)
  4. 2 = 0495473 Screw
    NOTE: (screws (2 x))
  5. 1 = 0495472 Basic body

    Note: