LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Engine - Special Tools) >> Engine >> 11-9260 Holder >> 0493938 119260 Holder Minimum set: Mechanical tools Mechanical tool >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

01 01 01 (662)

Consisting of:

Fig 1: Identifying Holder (11-9260)
G04739157Courtesy of BMW OF NORTH AMERICA, INC.
  1. 6 = 0495216 Bush
    NOTE: For counter support, for retaining flywheel when gearbox is removed Engine: M57TU2
  2. 5 = 0494793 Bush

    Note:

  3. 4 = 0494130 Screw
    NOTE: (Bolt (thread M12)) For counter support for retaining flywheel when gearbox is removed
  4. 3 = 0494129 Bush
    NOTE: (Bush for counter support) For counter support, for retaining flywheel when gearbox is removed Engine: N62, N73
  5. 2 = 0494035 Screw
    NOTE: (Bolt (thread M10) with washer) For screwing counter support
  6. 1 = 0494034 Holder
    NOTE: (Individual counter support)
scientia non olet · About LEMON Manuals