LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Brakes - Repair) >> Rear Brakes >> 34 21 947 Precision-turning both rear brake discs on both sides >> Stationary brake disc lathe

Stationary brake disc lathe

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only BMW-approved brake disc lathes may be used!

In the case of stationary brake disc lathes, the BRAKE DISC  must be removed.

Please refer to the equipment manufacturer's Owner's Handbook for the exact procedure.

Fig 1: Identifying Stationary Brake Disc Lathe
G08505098Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals