LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 374 (Communication Systems - Repair) >> Transceiver, Handset Support, Card Reader >> 84 31 550 Removing and installing/replacing hands-free microphone, driver's side

84 31 550 Removing and installing/replacing hands-free microphone, driver's side

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Lever out microphone cover (1) at front in direction of arrow.

Disconnect plug connection underneath and remove microphone cover (1).

Fig 1: Removing Microphone Cover
G04773239Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retaining lug (1) and feed out hands-free microphone (2) in direction of arrow.

Installation note: 

Arrow on hands-free microphone (2) points in direction of travel.

Fig 2: Removing Hands-Free Microphone
G04773240Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Disconnecting the plug connection for the handsfree microphone or emergency call button results in fault memory entries in the telephone control unit (limitation in the emergency call system).
After fitting, read out fault memory and if necessary delete entries.