Necessary preliminary work
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
- Partially remove FRONT WHEEL ARCH COVER (front section).
NOTE:
Minimum object temperature of side marker and bumper panel ≥ 18 °C.
If this temperature is not achieved, the components must be preheated.
If this temperature is not achieved, the components must be preheated.