63 25 000 Removing and installing/replacing auxiliary brake light
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks :
- Remove TRIM FOR REAR LID AT TOP .
Unfasten plug connection (1) and disconnect.
If necessary, unclip plug connections (2) on supplementary brake light (4).
Unlock slide (3) on both sides and remove supplementary brake light (4) in direction of arrow from rear window (5).
Installation:
Make sure supplementary brake light (4) is correctly positioned in rear window (5).