LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (Collision - Body Panel Repair (F07)) >> Support Members >> 41 14 505 Replacing Rear Left Outer Wheel Arch Section Partial Replacement (Side Wall Removed) >> Installation of outer wheel arch section

Installation of outer wheel arch section

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Do not grind/sand new part in area of bonding surfaces.

Clean all  bonding surfaces on new part and on vehicle with cleaning agent R1.

Apply adhesive to bonding surfaces.

Apply sealant to new CAVITY ACOUSTIC BAFFLE .

Install and rivet wheel arch outer part in connection with side panel.

scientia non olet · About LEMON Manuals