3.2 Bonding in conjunction with rivets

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the blind rivet wrench comes in as little contact with the adhesive as possible. There is a risk of damaging the exchangeable head of the rivet wrench due to emerged adhesive.
The standard punch rivets are always replaced by blind rivets in conjunction with bonding.
The required strength of the connection is only achieved through a combination of bonding and riveting.