65 13 060 Removing and installing/renewing speaker (mid-range speaker, in instrument panel)

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

Unclip trim (1) with special tool 00 9 325 from latch mechanisms and remove upwards.

Fig 1: Removing Trim From Latch Mechanisms Using Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation :

Marked retaining lugs must not be damaged.

Fig 2: Locating Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Graphic is an example!

Release screws (1).

Remove speaker (2).

Disconnect plug connection underneath and remove speaker (2).

Fig 3: Identifying Screws And Speaker

Courtesy of BMW OF NORTH AMERICA, INC.