LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 369 (Airbag, Audio, Navigation And Anti-Theft - Repair) >> Rear Window AERIALANTENNA >> 65 24 020 Removing and installing/replacing blocking circuit

65 24 020 Removing and installing/replacing blocking circuit

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks 

Unlock plug connections (1) and disconnect.

Release screw (2).

Remove blocking circuit (3).

Installation: 

Ensure suppressor circuit (3) is seated correctly.

Fig 1: Identifying Suppressor Circuit, Plug Connections And Screws
G08485283Courtesy of BMW OF NORTH AMERICA, INC.