LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Transmission - Take-Up And Retaining Bridge) >> Transmission In General >> 23..... Universal transmission retaining bridge

23..... Universal transmission retaining bridge

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE:
  • The transmission retaining bridge 24 0 200 is suitable for both manual and automatic transmissions
IMPORTANT: Adapters and spindles must be adapted for positive locking to the transmission.
(Risk of injury) 

Adapt adapters (1) and spindle with thrust piece (3) to transmission.

Adapt length with slide (2).

Screw in spindle (4).

IMPORTANT: Before mounting on assembly stand 00 1 450, check retaining bridge for secure seating.
Fig 1: Checking Universal Transmission Retaining Bridge Using Special Tool
G05511205Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals