Checking the ride height adjustment
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
- Adjust the vehicle to the NORMAL LEVEL .
- Read out the ride heights FL, FR, RL, RR via the diagnosis system.
- Measure the ride height of the vehicle.
- Compare the measured ride height with the nominal value.
- Ride height = MEASURED VALUE - nominal value . See REAR AXLE - RIDE HEIGHT, BMW, F07, REAR END or FRONT AXLE - RIDE HEIGHT, BMW, F07, REAR END .
- If the deviation from the nominal value >3 mm, perform the ride height adjustment with the aid of the diagnosis system.