Activating and filling air spring system
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
- Raise vehicle until wheels are freely suspended
- Check air spring lower section (1) for correct latching in wheel carrier, correct if necessary
IMPORTANT:
Risk of damage!
First raise the vehicle (until the wheels are freely suspended) and then activate the air spring system by inserting the fuse. Failure to comply may result in damage to the air springs!
First raise the vehicle (until the wheels are freely suspended) and then activate the air spring system by inserting the fuse. Failure to comply may result in damage to the air springs!
- Insert fuse (F182) in corresponding slot in fuse box
- Connect BMW diagnosis system
- Switch on ignition.
- Fill air springs using BMW diagnosis system (control unit functions)
- Lower vehicle
- Delete fault memory