52 26 Rear seats (through-loading system)
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Seat-back frame - to body | F07 | 40 Nm | ||
| 2AZ Centre armrest | F07 | 45 Nm | ||
| 3AZ Centre armrest - to seat-back frame | F07 | Self-locking hexagon nut with flange | 19 Nm | |
| 4AZ Backrest - to seat frame | F07 | 40 Nm | ||
| 5AZ Control unit holder | F07 | 7.5 Nm | ||
| 6AZ Belt outlet trim | F07 | 1.5 Nm | ||
| 7AZ Seat-back adjustment handle | F07 | 5 Nm | ||
| 8AZ Folder trim panel | F07 | 3.2 Nm | ||
| 9AZ Longitudinal seat adjustment handle | F07 | 4.5 Nm | ||
| 10AZ Centre arm rest trim | F07 | 1 Nm | ||
| 11AZ Swinging arm to seatback frame | F07 | Oval-head screw with collar | 19.5 Nm | |
| 12AZ Console to seat | F07 | 11 Nm | ||
| 13AZ Rubber band holder to backrest frame | F07 | 1.5 Nm | ||
| 14AZ Screw connection, fan | F07 | 1.5 Nm | ||
| 15AZ Damping box to backrest | F07 | 4.5 Nm |