52 26 042 Removing and installing/replacing cover for backrest angle adjustment on left or right

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Pull handle and release screw underneath.

Tightening torque 52 26 07AZ .

Remove handle.

Fig 1: Pulling Backrest Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Press release (1), one after another, with screwdriver and pull off cover.

Installation:

Cover and cover mount must not be damaged.

Fig 2: Pulling Off Cover

Courtesy of BMW OF NORTH AMERICA, INC.