52 25 201 Removing and installing/replacing rear panel on right rear seat back

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Unclip rear panel in marked area and remove upwards.

Fig 1: Removing Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) and guide (2) must not be damaged.

If necessary, replace defective clips or rear panel.

Fig 2: Identifying Rear Panel Clips And Guides

Courtesy of BMW OF NORTH AMERICA, INC.