52 25 030 Removing and installing/replacing armrest for rear seat backrest

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Unclip cover (1) upwards.

Installation note:

Retaining lugs must not be damaged.

Replace cover if necessary.

Fig 1: Identifying Rear Seat Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 02AZ .

Lift armrest out of vehicle.

Fig 2: Identifying Armrest Screws

Courtesy of BMW OF NORTH AMERICA, INC.