52 25 013 Removing and installing/replacing backrest frame for left rear seat

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work

REMOVE backrest frame.
REMOVE LEFT BACKREST COVER .

Remove plate (1).

Release screw (2).

Tightening torque 52 25 01AZ .

Remove trim (3) in direction of arrow.

Fig 1: Removing Backrest Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 01AZ .

Remove trim in direction of arrow.

Fig 2: Removing Backrest Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 04AZ .

Lift out backrest.

Fig 3: Identifying Backrest Screws

Courtesy of BMW OF NORTH AMERICA, INC.