31 35 005 Removing and installing/replacing anti-roll bar link (stabiliser link) for left/right stabiliser
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle.
Unscrew nuts (1).
Remove anti-roll bar link (2).
Installation note:
Replace self-locking nut.
Tightening torque 31 35 2AZ.