LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Body Equipment - Repair) >> Trim, Covers, Handle Trim >> 51 13 416 Removing and installing/replacing rear lid trim

51 13 416 Removing and installing/replacing rear lid trim

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Trim must be carefully unclipped due to risk of damage.

Grip trim (1) in center and unclip at points (2).

Fig 1: Identifying Rear Lid Trim
G08421697Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts must not be damaged or missing:

  1. Clips
  2. Clip bracket

If necessary, replace faulty parts.

Fig 2: Identifying Clip And Clip Bracket
G08421698Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals