51 49... Removing and installing/replacing trim for rear lid, side left or right

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Starting from (A), unclip trim panel (1) inwards.

Installation:

If necessary, replace faulty clips (2).

Fig 1: Removing Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Mountings (3) and guides (2) on trim panel (1) must not be damaged; replace trim panel if necessary.

Fig 2: Identifying Trim Panel With Mountings And Guides

Courtesy of BMW OF NORTH AMERICA, INC.