51 16 161 Replacing center console cover

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks

Remove CENTRE CONSOLE TRIM .

Remove foam strip (1).

Installation:

If necessary, replace foam strip (1).

Release screws (2) on left and right from center console cover (3).

Fig 1: Identifying Foam Strip And Screws On Left And Right Of Centre Console Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) from cup holder and remove cup holder.

Modify retainer clamps (2).

Remove FRONT CONTROLLER .

Remove CENTRE CONSOLE OPERATING UNIT .

Fig 2: Identifying Cup Holder Screws And Retainer Clamps

Courtesy of BMW OF NORTH AMERICA, INC.