51 45... Removing and installing/replacing lower instrument panel cover

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Carefully unclip cover (1) with special tool 64 1 020 at marked points and remove.

Installation note:

If necessary, replace faulty clamps on back of cover (1).

Replacement

Modify clamps.

Fig 1: Removing Instrument Panel Cover Using Special Tool (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.