51 71... Removing and installing/replacing left or right tank cover

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Release all screws (2).

Tightening torque 51 75 1AZ .

Unscrew nut (3).

Feed out tank cover (1) towards rear above tension strut (4).

Fig 1: Identifying Tank Cover, Tension Strut, Screws And Nut

Courtesy of BMW OF NORTH AMERICA, INC.