LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Body Equipment - Repair) >> Front Door Trim Panel With Arm Rest >> 51 48... Notes for bonding sound insulation (SI), doors >> Handling adhesive area on inner door panel

Handling adhesive area on inner door panel

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Adhesive Cleaning
a. Butyl bead applied to sound insulation with protective film a. CLEANING AGENTR2 
Under no circumstances: paint thinning 
b. Butyl mini-round profile Ø 3 mm from the roller b. Carry out bonding only after an air drying time ≥ 1 min. Air drying time may be omitted if the entire bonding surface is wiped with a dry cloth
c. Butyl round profile Ø 6 mm from the roller c. After cleaning, the bonding surface may not be touched with hands or fouled again
scientia non olet · About LEMON Manuals