3.1 Remove adhesive residue from the body and window glass
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
To remove the residual adhesive bead (1) from the body aperture and when reusing on the window glass (3), use the pinchweld scraper (2).
Position the pinchweld scraper (2) as shown and detach residual adhesive bead (1) to a thickness of approx. 0.5 mm.
Do not remove residual adhesive bead (1) until shortly before bonding.