LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Body Equipment - Repair) >> Front And Rear Window >> 51 31... General procedure when dismantling/installing bonded window glass >> 1 General information

1 General information

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Follow general instructions  . See 41 00... SAFETY AT WORK , 41 00... INFORMATION ON VEHICLE PROTECTION , 51 31... MATERIALS FOR BONDING WINDOW , 62 30... GENERAL NOTES ON THE HEAD-UP DISPLAY  or 99 00... TOUCHING UP PAINTWORK DAMAGE on window bonding.

MATERIALS  needed for window bonding.

The vehicle can be towed away or driven without a windscreen, rear window and side window.

When carrying out dismantling/installation work and during the hardening time, the vehicle must be standing on its wheels on a level floor.

The windscreen, rear window and side windows are glued to the body. This bonding will increase the torsional rigidity of the vehicle. To obtain perfect bonding, comply with the installation procedure described in the following.

scientia non olet · About LEMON Manuals