51 47... Removing and installing/replacing outer left or right screen shield

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Tap screen shield (1) with ball of hand outwards to release and remove.

Fig 1: Removing Screen Shield

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Plastic brackets (2) on screen shield (1) must not be damaged.

Plastic brackets (2) must engage neatly.

Fig 2: Identifying Plastic Brackets And Screen Shield

Courtesy of BMW OF NORTH AMERICA, INC.