51 47... Removing and installing/replacing cover partition wall fixture

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove FRONT LUGGAGE COMPARTMENT FLOOR TRIM PANEL .

Unclip cover for partition wall fixture (1) at marked locations and remove cover.

Fig 1: Identifying Partition Wall Fixture Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace faulty clips (1)

Klipp (1) = yellow

Replacement

Modify clips (1).

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.