Replacing model designation

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Mark position of model designation (1) with yellow plastic adhesive tape (2).

Coat separating string or strong yarn with tensides (e.g. washing-up liquid).

Cut through adhesive layer and remove model designation (1).

Refer to "Installation" operation for further procedure.

Fig 1: Identifying Model Designation And Plastic Adhesive Tape

Courtesy of BMW OF NORTH AMERICA, INC.