34 00 012 Parking brake function check
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
- Connect BMW diagnosis system.
- Carry out vehicle test
- Call up "Workshop braking-in" service function.
- Start braking-in program.
- (Parking brake indicator lamp in instrument cluster flashes at low frequency)
- Drive vehicle onto brake analyser and pull parking brake button once.
- Parking brake is applied at approx. 15 km/h with reduced force.
- (Parking brake indicator lamp in instrument cluster flashes at high frequency)
- Braking-in procedure takes 3 minutes.
- Braking-in procedure can be terminated by pressing the parking brake button.
- Delete fault memory.